From c8b9a7848bbcd69723f33d3dbf172c56e9a626fe Mon Sep 17 00:00:00 2001 From: htamas Date: Wed, 20 Aug 2025 14:45:50 +0200 Subject: [PATCH] moved to this new repo --- configure.sh | 57 +++ hyprland.conf | 314 ++++++++++++++ init.lua | 1021 ++++++++++++++++++++++++++++++++++++++++++++++ set_wallpaper.sh | 8 + 4 files changed, 1400 insertions(+) create mode 100755 configure.sh create mode 100644 hyprland.conf create mode 100644 init.lua create mode 100755 set_wallpaper.sh diff --git a/configure.sh b/configure.sh new file mode 100755 index 0000000..e5e1023 --- /dev/null +++ b/configure.sh @@ -0,0 +1,57 @@ +START_DIR=$(pwd) +echo "$START_DIR" + +echo "Installing basic drivers and utilities" +sudo pacman -Sy +sudo pacman -S mesa sof-firmware zsh curl linux-firmware-marvell gcc man-db lib32-mesa openssh lib32-vulkan-intel vulkan-intel reflector power-profiles-daemon cpupower lib32-pipewire pipewire-audio pipewire-pulse pavucontrol git base-devel xdg-user-dirs --needed --noconfirm + +echo "Enabling reflector service for mirror optimization" +sudo systemctl enable reflector + +echo "Installing yay" +git clone https://aur.archlinux.org/yay-bin.git $HOME/yay +sleep 2 + +cd $HOME/yay/ +makepkg -si +cd +sleep 2 + +echo "Yay sync" +yay -Sy + +echo "turning off grub timeout" +sudo nano /etc/default/grub +sudo grub-mkconfig -o /boot/grub/grub.cfg + +echo "Installing hyprland and stuff for wm" +sudo pacman -S hyprland yazi ffmpeg 7zip jq poppler fd ripgrep fzf zoxide resvg imagemagick ttf-jetbrains-mono-nerd ghostty swaync brightnessctl wireplumber xdg-desktop-portal-hyprland hyprpolkitagent qt5-wayland qt6-wayland hyprpaper xclip sddm rofi-wayland unzip make ripgrep fd neovim --needed --noconfirm +yay -S xwaylandvideobridge --needed --noconfirm +yay -S zen-browser-bin --needed --noconfirm + +echo "Turining on sddm login manager" +sudo systemctl enable sddm + +echo "Cloining kickstart nvim to nvim config location" +git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim +sudo cp "$START_DIR"/init.lua $HOME/.config/nvim + +echo "Installing rust and go and bootdev cli" +curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh +curl -sS https://webi.sh/golang | sh; source ~/.config/envman/PATH.env +go install github.com/bootdotdev/bootdev@latest +curl -sS https://webi.sh/gh | sh; source ~/.config/envman/PATH.env + +sudo mkdir -p $HOME/.config/hypr/ +sudo cp "$START_DIR"/hyprland.conf $HOME/.config/hypr/ + +#hyprpaper and conf +mkdir -p $HOME/Pictures/Wallpaper/ +git clone https://github.com/htamas1210/Wallpapers.git $HOME/Pictures/Wallpaper/ +printf "splash = true\nipc = on" > $HOME/.config/hypr/hyprpaper.conf +sudo cp "$START_DIR"/set_wallpaper.sh $HOME/.config/hypr/ + +echo "Installing Oh my zsh" +sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" +sudo cp $HOME/neovim_conf/.zshcr $HOME/zshrc +chsh -s $(which zsh) diff --git a/hyprland.conf b/hyprland.conf new file mode 100644 index 0000000..6dcd954 --- /dev/null +++ b/hyprland.conf @@ -0,0 +1,314 @@ + +# ####################################################################################### +# AUTOGENERATED HYPRLAND CONFIG. +# EDIT THIS CONFIG ACCORDING TO THE WIKI INSTRUCTIONS. +# ####################################################################################### + +autogenerated = 0 # remove this line to remove the warning + +# This is an example Hyprland config file. +# Refer to the wiki for more information. +# https://wiki.hypr.land/Configuring/ + +# Please note not all available settings / options are set here. +# For a full list, see the wiki + +# You can split this configuration into multiple files +# Create your files separately and then link them to this file like this: +# source = ~/.config/hypr/myColors.conf + + +################ +### MONITORS ### +################ + +# See https://wiki.hypr.land/Configuring/Monitors/ +monitor=,preferred,auto,auto +monitor=,preferred,auto,auto #still need to test if this works with second monitor + +################### +### MY PROGRAMS ### +################### + +# See https://wiki.hypr.land/Configuring/Keywords/ + +# Set programs that you use +$terminal = ghostty +$fileManager = nemo +$menu = wofi --show drun +################# +### AUTOSTART ### +################# + +# Autostart necessary processes (like notifications daemons, status bars, etc.) +# Or execute your favorite apps at launch like this: + +# exec-once = $terminal +# exec-once = nm-applet & +# exec-once = waybar +exec-once = hyprpaper +exec-once = sh $HOME/.config/hypr/set_wallpaper.sh + + +############################# +### ENVIRONMENT VARIABLES ### +############################# + +# See https://wiki.hypr.land/Configuring/Environment-variables/ + +env = XCURSOR_SIZE,24 +env = HYPRCURSOR_SIZE,24 + + +################### +### PERMISSIONS ### +################### + +# See https://wiki.hypr.land/Configuring/Permissions/ +# Please note permission changes here require a Hyprland restart and are not applied on-the-fly +# for security reasons + +# ecosystem { +# enforce_permissions = 1 +# } + +# permission = /usr/(bin|local/bin)/grim, screencopy, allow +# permission = /usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland, screencopy, allow +# permission = /usr/(bin|local/bin)/hyprpm, plugin, allow + + +##################### +### LOOK AND FEEL ### +##################### + +# Refer to https://wiki.hypr.land/Configuring/Variables/ + +# https://wiki.hypr.land/Configuring/Variables/#general +general { + gaps_in = 2 + gaps_out = 5 + + border_size = 2 + + # https://wiki.hypr.land/Configuring/Variables/#variable-types for info about colors + col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg + col.inactive_border = rgba(595959aa) + + # Set to true enable resizing windows by clicking and dragging on borders and gaps + resize_on_border = false + + # Please see https://wiki.hypr.land/Configuring/Tearing/ before you turn this on + allow_tearing = false + + layout = dwindle +} + +# https://wiki.hypr.land/Configuring/Variables/#decoration +decoration { + rounding = 10 + rounding_power = 2 + + # Change transparency of focused and unfocused windows + active_opacity = 1.0 + inactive_opacity = 1.0 + + shadow { + enabled = false + range = 4 + render_power = 3 + color = rgba(1a1a1aee) + } + + # https://wiki.hypr.land/Configuring/Variables/#blur + blur { + enabled = false + size = 3 + passes = 1 + + vibrancy = 0.1696 + } +} + +# https://wiki.hypr.land/Configuring/Variables/#animations +animations { + enabled = yes, please :) + + # Default animations, see https://wiki.hypr.land/Configuring/Animations/ for more + + bezier = easeOutQuint,0.23,1,0.32,1 + bezier = easeInOutCubic,0.65,0.05,0.36,1 + bezier = linear,0,0,1,1 + bezier = almostLinear,0.5,0.5,0.75,1.0 + bezier = quick,0.15,0,0.1,1 + + animation = global, 1, 10, default + animation = border, 1, 5.39, easeOutQuint + animation = windows, 1, 4.79, easeOutQuint + animation = windowsIn, 1, 4.1, easeOutQuint, popin 87% + animation = windowsOut, 1, 1.49, linear, popin 87% + animation = fadeIn, 1, 1.73, almostLinear + animation = fadeOut, 1, 1.46, almostLinear + animation = fade, 1, 3.03, quick + animation = layers, 1, 3.81, easeOutQuint + animation = layersIn, 1, 4, easeOutQuint, fade + animation = layersOut, 1, 1.5, linear, fade + animation = fadeLayersIn, 1, 1.79, almostLinear + animation = fadeLayersOut, 1, 1.39, almostLinear + animation = workspaces, 1, 1.94, almostLinear, fade + animation = workspacesIn, 1, 1.21, almostLinear, fade + animation = workspacesOut, 1, 1.94, almostLinear, fade +} + +# Ref https://wiki.hypr.land/Configuring/Workspace-Rules/ +# "Smart gaps" / "No gaps when only" +# uncomment all if you wish to use that. +# workspace = w[tv1], gapsout:0, gapsin:0 +# workspace = f[1], gapsout:0, gapsin:0 +# windowrule = bordersize 0, floating:0, onworkspace:w[tv1] +# windowrule = rounding 0, floating:0, onworkspace:w[tv1] +# windowrule = bordersize 0, floating:0, onworkspace:f[1] +# windowrule = rounding 0, floating:0, onworkspace:f[1] + +# See https://wiki.hypr.land/Configuring/Dwindle-Layout/ for more +dwindle { + pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below + preserve_split = true # You probably want this +} + +# See https://wiki.hypr.land/Configuring/Master-Layout/ for more +master { + new_status = master +} + +# https://wiki.hypr.land/Configuring/Variables/#misc +misc { + force_default_wallpaper = 2 # Set to 0 or 1 to disable the anime mascot wallpapers + disable_hyprland_logo = false # If true disables the random hyprland logo / anime girl background. :( +} + + +############# +### INPUT ### +############# + +# https://wiki.hypr.land/Configuring/Variables/#input +input { + kb_layout = hu + kb_variant = + kb_model = + kb_options = + kb_rules = + + follow_mouse = 1 + + sensitivity = 0 # -1.0 - 1.0, 0 means no modification. + + repeat_rate = 45 + repeat_delay = 200 + + touchpad { + natural_scroll = true + } +} + +# https://wiki.hypr.land/Configuring/Variables/#gestures +gestures { + workspace_swipe = false +} + +# Example per-device config +# See https://wiki.hypr.land/Configuring/Keywords/#per-device-input-configs for more +device { + name = epic-mouse-v1 + sensitivity = -0.5 +} + + +################### +### KEYBINDINGS ### +################### + +# See https://wiki.hypr.land/Configuring/Keywords/ +$mainMod = SUPER # Sets "Windows" key as main modifier + +# Example binds, see https://wiki.hypr.land/Configuring/Binds/ for more +bind = $mainMod, Return, exec, $terminal +bind = $mainMod, Q, killactive, +bind = $mainMod, E, exec, $fileManager +bind = $mainMod, V, togglefloating, +bind = $mainMod, Space, exec, $menu +bind = $mainMod, P, pseudo, # dwindle +bind = $mainMod, J, togglesplit, # dwindle +bind = $mainMod, B, exec, xdg-open https:// + +# Move focus with mainMod + arrow keys +bind = $mainMod, left, movefocus, l +bind = $mainMod, right, movefocus, r +bind = $mainMod, up, movefocus, u +bind = $mainMod, down, movefocus, d + +# Switch workspaces with mainMod + [0-9] +bind = $mainMod, 1, workspace, 1 +bind = $mainMod, 2, workspace, 2 +bind = $mainMod, 3, workspace, 3 +bind = $mainMod, 4, workspace, 4 +bind = $mainMod, 5, workspace, 5 +bind = $mainMod, 6, workspace, 6 +bind = $mainMod, 7, workspace, 7 +bind = $mainMod, 8, workspace, 8 +bind = $mainMod, 9, workspace, 9 +bind = $mainMod, 0, workspace, 10 + +# Move active window to a workspace with mainMod + SHIFT + [0-9] +bind = $mainMod SHIFT, 1, movetoworkspace, 1 +bind = $mainMod SHIFT, 2, movetoworkspace, 2 +bind = $mainMod SHIFT, 3, movetoworkspace, 3 +bind = $mainMod SHIFT, 4, movetoworkspace, 4 +bind = $mainMod SHIFT, 5, movetoworkspace, 5 +bind = $mainMod SHIFT, 6, movetoworkspace, 6 +bind = $mainMod SHIFT, 7, movetoworkspace, 7 +bind = $mainMod SHIFT, 8, movetoworkspace, 8 +bind = $mainMod SHIFT, 9, movetoworkspace, 9 +bind = $mainMod SHIFT, 0, movetoworkspace, 10 + +# Example special workspace (scratchpad) +bind = $mainMod, S, togglespecialworkspace, magic +bind = $mainMod SHIFT, S, movetoworkspace, special:magic + +# Scroll through existing workspaces with mainMod + scroll +bind = $mainMod, mouse_down, workspace, e+1 +bind = $mainMod, mouse_up, workspace, e-1 + +# Move/resize windows with mainMod + LMB/RMB and dragging +bindm = $mainMod, mouse:272, movewindow +bindm = $mainMod, mouse:273, resizewindow + +# Laptop multimedia keys for volume and LCD brightness +bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+ +bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%- +bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle +bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle +bindel = ,XF86MonBrightnessUp, exec, brightnessctl -e4 -n2 set 5%+ +bindel = ,XF86MonBrightnessDown, exec, brightnessctl -e4 -n2 set 5%- + +# Requires playerctl +bindl = , XF86AudioNext, exec, playerctl next +bindl = , XF86AudioPause, exec, playerctl play-pause +bindl = , XF86AudioPlay, exec, playerctl play-pause +bindl = , XF86AudioPrev, exec, playerctl previous + +############################## +### WINDOWS AND WORKSPACES ### +############################## + +# See https://wiki.hypr.land/Configuring/Window-Rules/ for more +# See https://wiki.hypr.land/Configuring/Workspace-Rules/ for workspace rules + +# Example windowrule +# windowrule = float,class:^(kitty)$,title:^(kitty)$ + +# Ignore maximize requests from apps. You'll probably like this. +windowrule = suppressevent maximize, class:.* + +# Fix some dragging issues with XWayland +windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0 diff --git a/init.lua b/init.lua new file mode 100644 index 0000000..ac40f6d --- /dev/null +++ b/init.lua @@ -0,0 +1,1021 @@ +--[[ + +===================================================================== +==================== READ THIS BEFORE CONTINUING ==================== +===================================================================== +======== .-----. ======== +======== .----------------------. | === | ======== +======== |.-""""""""""""""""""-.| |-----| ======== +======== || || | === | ======== +======== || KICKSTART.NVIM || |-----| ======== +======== || || | === | ======== +======== || || |-----| ======== +======== ||:Tutor || |:::::| ======== +======== |'-..................-'| |____o| ======== +======== `"")----------------(""` ___________ ======== +======== /::::::::::| |::::::::::\ \ no mouse \ ======== +======== /:::========| |==hjkl==:::\ \ required \ ======== +======== '""""""""""""' '""""""""""""' '""""""""""' ======== +======== ======== +===================================================================== +===================================================================== + +What is Kickstart? + + Kickstart.nvim is *not* a distribution. + + Kickstart.nvim is a starting point for your own configuration. + The goal is that you can read every line of code, top-to-bottom, understand + what your configuration is doing, and modify it to suit your needs. + + Once you've done that, you can start exploring, configuring and tinkering to + make Neovim your own! That might mean leaving Kickstart just the way it is for a while + or immediately breaking it into modular pieces. It's up to you! + + If you don't know anything about Lua, I recommend taking some time to read through + a guide. One possible example which will only take 10-15 minutes: + - https://learnxinyminutes.com/docs/lua/ + + After understanding a bit more about Lua, you can use `:help lua-guide` as a + reference for how Neovim integrates Lua. + - :help lua-guide + - (or HTML version): https://neovim.io/doc/user/lua-guide.html + +Kickstart Guide: + + TODO: The very first thing you should do is to run the command `:Tutor` in Neovim. + + If you don't know what this means, type the following: + - + - : + - Tutor + - + + (If you already know the Neovim basics, you can skip this step.) + + Once you've completed that, you can continue working through **AND READING** the rest + of the kickstart init.lua. + + Next, run AND READ `:help`. + This will open up a help window with some basic information + about reading, navigating and searching the builtin help documentation. + + This should be the first place you go to look when you're stuck or confused + with something. It's one of my favorite Neovim features. + + MOST IMPORTANTLY, we provide a keymap "sh" to [s]earch the [h]elp documentation, + which is very useful when you're not exactly sure of what you're looking for. + + I have left several `:help X` comments throughout the init.lua + These are hints about where to find more information about the relevant settings, + plugins or Neovim features used in Kickstart. + + NOTE: Look for lines like this + + Throughout the file. These are for you, the reader, to help you understand what is happening. + Feel free to delete them once you know what you're doing, but they should serve as a guide + for when you are first encountering a few different constructs in your Neovim config. + +If you experience any errors while trying to install kickstart, run `:checkhealth` for more info. + +I hope you enjoy your Neovim journey, +- TJ + +P.S. You can delete this when you're done too. It's your config now! :) +--]] + +-- Set as the leader key +-- See `:help mapleader` +-- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used) +vim.g.mapleader = ' ' +vim.g.maplocalleader = ' ' + +-- Set to true if you have a Nerd Font installed and selected in the terminal +vim.g.have_nerd_font = true + +-- [[ Setting options ]] +-- See `:help vim.o` +-- NOTE: You can change these options as you wish! +-- For more options, you can see `:help option-list` + +-- Make line numbers default +vim.o.number = true +-- You can also add relative line numbers, to help with jumping. +-- Experiment for yourself to see if you like it! +-- vim.o.relativenumber = true + +-- Enable mouse mode, can be useful for resizing splits for example! +vim.o.mouse = 'a' + +-- Don't show the mode, since it's already in the status line +vim.o.showmode = false + +-- Sync clipboard between OS and Neovim. +-- Schedule the setting after `UiEnter` because it can increase startup-time. +-- Remove this option if you want your OS clipboard to remain independent. +-- See `:help 'clipboard'` +vim.schedule(function() + vim.o.clipboard = 'unnamedplus' +end) + +-- Enable break indent +vim.o.breakindent = true + +-- Save undo history +vim.o.undofile = true + +-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term +vim.o.ignorecase = true +vim.o.smartcase = true + +-- Keep signcolumn on by default +vim.o.signcolumn = 'yes' + +-- Decrease update time +vim.o.updatetime = 250 + +-- Decrease mapped sequence wait time +vim.o.timeoutlen = 300 + +-- Configure how new splits should be opened +vim.o.splitright = true +vim.o.splitbelow = true + +-- Sets how neovim will display certain whitespace characters in the editor. +-- See `:help 'list'` +-- and `:help 'listchars'` +-- +-- Notice listchars is set using `vim.opt` instead of `vim.o`. +-- It is very similar to `vim.o` but offers an interface for conveniently interacting with tables. +-- See `:help lua-options` +-- and `:help lua-options-guide` +vim.o.list = true +vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } + +-- Preview substitutions live, as you type! +vim.o.inccommand = 'split' + +-- Show which line your cursor is on +vim.o.cursorline = true + +-- Minimal number of screen lines to keep above and below the cursor. +vim.o.scrolloff = 10 + +-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`), +-- instead raise a dialog asking if you wish to save the current file(s) +-- See `:help 'confirm'` +vim.o.confirm = true + +-- [[ Basic Keymaps ]] +-- See `:help vim.keymap.set()` + +-- Clear highlights on search when pressing in normal mode +-- See `:help hlsearch` +vim.keymap.set('n', '', 'nohlsearch') + +-- Diagnostic keymaps +vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) + +-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier +-- for people to discover. Otherwise, you normally need to press , which +-- is not what someone will guess without a bit more experience. +-- +-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping +-- or just use to exit terminal mode +vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' }) + +-- TIP: Disable arrow keys in normal mode +-- vim.keymap.set('n', '', 'echo "Use h to move!!"') +-- vim.keymap.set('n', '', 'echo "Use l to move!!"') +-- vim.keymap.set('n', '', 'echo "Use k to move!!"') +-- vim.keymap.set('n', '', 'echo "Use j to move!!"') + +-- Keybinds to make split navigation easier. +-- Use CTRL+ to switch between windows +-- +-- See `:help wincmd` for a list of all window commands +vim.keymap.set('n', '', '', { desc = 'Move focus to the left window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the right window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the lower window' }) +vim.keymap.set('n', '', '', { desc = 'Move focus to the upper window' }) + +-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes +-- vim.keymap.set("n", "", "H", { desc = "Move window to the left" }) +-- vim.keymap.set("n", "", "L", { desc = "Move window to the right" }) +-- vim.keymap.set("n", "", "J", { desc = "Move window to the lower" }) +-- vim.keymap.set("n", "", "K", { desc = "Move window to the upper" }) + +-- [[ Basic Autocommands ]] +-- See `:help lua-guide-autocommands` + +-- Highlight when yanking (copying) text +-- Try it with `yap` in normal mode +-- See `:help vim.hl.on_yank()` +vim.api.nvim_create_autocmd('TextYankPost', { + desc = 'Highlight when yanking (copying) text', + group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }), + callback = function() + vim.hl.on_yank() + end, +}) + +-- [[ Install `lazy.nvim` plugin manager ]] +-- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info +local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' +if not (vim.uv or vim.loop).fs_stat(lazypath) then + local lazyrepo = 'https://github.com/folke/lazy.nvim.git' + local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } + if vim.v.shell_error ~= 0 then + error('Error cloning lazy.nvim:\n' .. out) + end +end + +---@type vim.Option +local rtp = vim.opt.rtp +rtp:prepend(lazypath) + +-- [[ Configure and install plugins ]] +-- +-- To check the current status of your plugins, run +-- :Lazy +-- +-- You can press `?` in this menu for help. Use `:q` to close the window +-- +-- To update plugins you can run +-- :Lazy update +-- +-- NOTE: Here is where you install your plugins. + +vim.o.tabstop = 4 -- A TAB character looks like 4 spaces +vim.o.expandtab = true -- Pressing the TAB key will insert spaces instead of a TAB character +vim.o.softtabstop = 4 -- Number of spaces inserted instead of a TAB character +vim.o.shiftwidth = 4 -- Number of spaces inserted when indenting + +require('lazy').setup({ + -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). + --'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatic + -- NOTE: Plugins can also be added by using a table, + -- with the first argument being the link and the following + -- keys can be used to configure plugin behavior/loading/etc. + -- + -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded. + -- + + -- Alternatively, use `config = function() ... end` for full control over the configuration. + -- If you prefer to call `setup` explicitly, use: + -- { + -- 'lewis6991/gitsigns.nvim', + -- config = function() + -- require('gitsigns').setup({ + -- -- Your gitsigns configuration here + -- }) + -- end, + -- } + -- + -- Here is a more advanced example where we pass configuration + -- options to `gitsigns.nvim`. + -- + -- See `:help gitsigns` to understand what the configuration keys do + { -- Adds git related signs to the gutter, as well as utilities for managing changes + 'lewis6991/gitsigns.nvim', + opts = { + signs = { + add = { text = '+' }, + change = { text = '~' }, + delete = { text = '_' }, + topdelete = { text = '‾' }, + changedelete = { text = '~' }, + }, + }, + }, + + -- NOTE: Plugins can also be configured to run Lua code when they are loaded. + -- + -- This is often very useful to both group configuration, as well as handle + -- lazy loading plugins that don't need to be loaded immediately at startup. + -- + -- For example, in the following configuration, we use: + -- event = 'VimEnter' + -- + -- which loads which-key before all the UI elements are loaded. Events can be + -- normal autocommands events (`:help autocmd-events`). + -- + -- Then, because we use the `opts` key (recommended), the configuration runs + -- after the plugin has been loaded as `require(MODULE).setup(opts)`. + + { -- Useful plugin to show you pending keybinds. + 'folke/which-key.nvim', + event = 'VimEnter', -- Sets the loading event to 'VimEnter' + opts = { + -- delay between pressing a key and opening which-key (milliseconds) + -- this setting is independent of vim.o.timeoutlen + delay = 0, + icons = { + -- set icon mappings to true if you have a Nerd Font + mappings = vim.g.have_nerd_font, + -- If you are using a Nerd Font: set icons.keys to an empty table which will use the + -- default which-key.nvim defined Nerd Font icons, otherwise define a string table + keys = vim.g.have_nerd_font and {} or { + Up = ' ', + Down = ' ', + Left = ' ', + Right = ' ', + C = ' ', + M = ' ', + D = ' ', + S = ' ', + CR = ' ', + Esc = ' ', + ScrollWheelDown = ' ', + ScrollWheelUp = ' ', + NL = ' ', + BS = ' ', + Space = ' ', + Tab = ' ', + F1 = '', + F2 = '', + F3 = '', + F4 = '', + F5 = '', + F6 = '', + F7 = '', + F8 = '', + F9 = '', + F10 = '', + F11 = '', + F12 = '', + }, + }, + + -- Document existing key chains + spec = { + { 's', group = '[S]earch' }, + { 't', group = '[T]oggle' }, + { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, + }, + }, + }, + + -- NOTE: Plugins can specify dependencies. + -- + -- The dependencies are proper plugin specifications as well - anything + -- you do for a plugin at the top level, you can do for a dependency. + -- + -- Use the `dependencies` key to specify the dependencies of a particular plugin + + { -- Fuzzy Finder (files, lsp, etc) + 'nvim-telescope/telescope.nvim', + event = 'VimEnter', + dependencies = { + 'nvim-lua/plenary.nvim', + { -- If encountering errors, see telescope-fzf-native README for installation instructions + 'nvim-telescope/telescope-fzf-native.nvim', + + -- `build` is used to run some command when the plugin is installed/updated. + -- This is only run then, not every time Neovim starts up. + build = 'make', + + -- `cond` is a condition used to determine whether this plugin should be + -- installed and loaded. + cond = function() + return vim.fn.executable 'make' == 1 + end, + }, + { 'nvim-telescope/telescope-ui-select.nvim' }, + + -- Useful for getting pretty icons, but requires a Nerd Font. + { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, + }, + config = function() + -- Telescope is a fuzzy finder that comes with a lot of different things that + -- it can fuzzy find! It's more than just a "file finder", it can search + -- many different aspects of Neovim, your workspace, LSP, and more! + -- + -- The easiest way to use Telescope, is to start by doing something like: + -- :Telescope help_tags + -- + -- After running this command, a window will open up and you're able to + -- type in the prompt window. You'll see a list of `help_tags` options and + -- a corresponding preview of the help. + -- + -- Two important keymaps to use while in Telescope are: + -- - Insert mode: + -- - Normal mode: ? + -- + -- This opens a window that shows you all of the keymaps for the current + -- Telescope picker. This is really useful to discover what Telescope can + -- do as well as how to actually do it! + + -- [[ Configure Telescope ]] + -- See `:help telescope` and `:help telescope.setup()` + require('telescope').setup { + -- You can put your default mappings / updates / etc. in here + -- All the info you're looking for is in `:help telescope.setup()` + -- + -- defaults = { + -- mappings = { + -- i = { [''] = 'to_fuzzy_refine' }, + -- }, + -- }, + -- pickers = {} + extensions = { + ['ui-select'] = { + require('telescope.themes').get_dropdown(), + }, + }, + } + + -- Enable Telescope extensions if they are installed + pcall(require('telescope').load_extension, 'fzf') + pcall(require('telescope').load_extension, 'ui-select') + + -- See `:help telescope.builtin` + local builtin = require 'telescope.builtin' + vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) + vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) + vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) + vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) + vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) + vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) + vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) + vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) + + -- Slightly advanced example of overriding default behavior and theme + vim.keymap.set('n', '/', function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { + winblend = 10, + previewer = false, + }) + end, { desc = '[/] Fuzzily search in current buffer' }) + + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set('n', 's/', function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, { desc = '[S]earch [/] in Open Files' }) + + -- Shortcut for searching your Neovim configuration files + vim.keymap.set('n', 'sn', function() + builtin.find_files { cwd = vim.fn.stdpath 'config' } + end, { desc = '[S]earch [N]eovim files' }) + end, + }, + + -- LSP Plugins + { + -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins + -- used for completion, annotations and signatures of Neovim apis + 'folke/lazydev.nvim', + ft = 'lua', + opts = { + library = { + -- Load luvit types when the `vim.uv` word is found + { path = '${3rd}/luv/library', words = { 'vim%.uv' } }, + }, + }, + }, + { + -- Main LSP Configuration + 'neovim/nvim-lspconfig', + dependencies = { + -- Automatically install LSPs and related tools to stdpath for Neovim + -- Mason must be loaded before its dependents so we need to set it up here. + -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})` + { 'mason-org/mason.nvim', opts = {} }, + 'mason-org/mason-lspconfig.nvim', + 'WhoIsSethDaniel/mason-tool-installer.nvim', + + -- Useful status updates for LSP. + { 'j-hui/fidget.nvim', opts = {} }, + + -- Allows extra capabilities provided by blink.cmp + 'saghen/blink.cmp', + }, + config = function() + -- Brief aside: **What is LSP?** + -- + -- LSP is an initialism you've probably heard, but might not understand what it is. + -- + -- LSP stands for Language Server Protocol. It's a protocol that helps editors + -- and language tooling communicate in a standardized fashion. + -- + -- In general, you have a "server" which is some tool built to understand a particular + -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers + -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone + -- processes that communicate with some "client" - in this case, Neovim! + -- + -- LSP provides Neovim with features like: + -- - Go to definition + -- - Find references + -- - Autocompletion + -- - Symbol Search + -- - and more! + -- + -- Thus, Language Servers are external tools that must be installed separately from + -- Neovim. This is where `mason` and related plugins come into play. + -- + -- If you're wondering about lsp vs treesitter, you can check out the wonderfully + -- and elegantly composed help section, `:help lsp-vs-treesitter` + + -- This function gets run when an LSP attaches to a particular buffer. + -- That is to say, every time a new file is opened that is associated with + -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this + -- function will be executed to configure the current buffer + vim.api.nvim_create_autocmd('LspAttach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), + callback = function(event) + -- NOTE: Remember that Lua is a real programming language, and as such it is possible + -- to define small helper and utility functions so you don't have to repeat yourself. + -- + -- In this case, we create a function that lets us more easily define mappings specific + -- for LSP related items. It sets the mode, buffer and description for us each time. + local map = function(keys, func, desc, mode) + mode = mode or 'n' + vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) + end + + -- Rename the variable under your cursor. + -- Most Language Servers support renaming across files, etc. + map('grn', vim.lsp.buf.rename, '[R]e[n]ame') + + -- Execute a code action, usually your cursor needs to be on top of an error + -- or a suggestion from your LSP for this to activate. + map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' }) + + -- Find references for the word under your cursor. + map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') + + -- Jump to the implementation of the word under your cursor. + -- Useful when your language has ways of declaring types without an actual implementation. + map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') + + -- Jump to the definition of the word under your cursor. + -- This is where a variable was first declared, or where a function is defined, etc. + -- To jump back, press . + map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') + + -- WARN: This is not Goto Definition, this is Goto Declaration. + -- For example, in C this would take you to the header. + map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') + + -- Fuzzy find all the symbols in your current document. + -- Symbols are things like variables, functions, types, etc. + map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols') + + -- Fuzzy find all the symbols in your current workspace. + -- Similar to document symbols, except searches over your entire project. + map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols') + + -- Jump to the type of the word under your cursor. + -- Useful when you're not sure what type a variable is and you want to see + -- the definition of its *type*, not where it was *defined*. + map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition') + + -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10) + ---@param client vim.lsp.Client + ---@param method vim.lsp.protocol.Method + ---@param bufnr? integer some lsp support methods only in specific files + ---@return boolean + local function client_supports_method(client, method, bufnr) + if vim.fn.has 'nvim-0.11' == 1 then + return client:supports_method(method, bufnr) + else + return client.supports_method(method, { bufnr = bufnr }) + end + end + + -- The following two autocommands are used to highlight references of the + -- word under your cursor when your cursor rests there for a little while. + -- See `:help CursorHold` for information about when this is executed + -- + -- When you move your cursor, the highlights will be cleared (the second autocommand). + local client = vim.lsp.get_client_by_id(event.data.client_id) + if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then + local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) + vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.document_highlight, + }) + + vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.clear_references, + }) + + vim.api.nvim_create_autocmd('LspDetach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), + callback = function(event2) + vim.lsp.buf.clear_references() + vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } + end, + }) + end + + -- The following code creates a keymap to toggle inlay hints in your + -- code, if the language server you are using supports them + -- + -- This may be unwanted, since they displace some of your code + if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then + map('th', function() + vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) + end, '[T]oggle Inlay [H]ints') + end + end, + }) + + -- Diagnostic Config + -- See :help vim.diagnostic.Opts + vim.diagnostic.config { + severity_sort = true, + float = { border = 'rounded', source = 'if_many' }, + underline = { severity = vim.diagnostic.severity.ERROR }, + signs = vim.g.have_nerd_font and { + text = { + [vim.diagnostic.severity.ERROR] = '󰅚 ', + [vim.diagnostic.severity.WARN] = '󰀪 ', + [vim.diagnostic.severity.INFO] = '󰋽 ', + [vim.diagnostic.severity.HINT] = '󰌶 ', + }, + } or {}, + virtual_text = { + source = 'if_many', + spacing = 2, + format = function(diagnostic) + local diagnostic_message = { + [vim.diagnostic.severity.ERROR] = diagnostic.message, + [vim.diagnostic.severity.WARN] = diagnostic.message, + [vim.diagnostic.severity.INFO] = diagnostic.message, + [vim.diagnostic.severity.HINT] = diagnostic.message, + } + return diagnostic_message[diagnostic.severity] + end, + }, + } + + -- LSP servers and clients are able to communicate to each other what features they support. + -- By default, Neovim doesn't support everything that is in the LSP specification. + -- When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities. + -- So, we create new capabilities with blink.cmp, and then broadcast that to the servers. + local capabilities = require('blink.cmp').get_lsp_capabilities() + + -- Enable the following language servers + -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. + -- + -- Add any additional override configuration in the following tables. Available keys are: + -- - cmd (table): Override the default command used to start the server + -- - filetypes (table): Override the default list of associated filetypes for the server + -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features. + -- - settings (table): Override the default settings passed when initializing the server. + -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/ + local servers = { + clangd = {}, + gopls = {}, + pyright = {}, + rust_analyzer = {}, + -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs + -- + -- Some languages (like typescript) have entire language plugins that can be useful: + -- https://github.com/pmizio/typescript-tools.nvim + -- + -- But for many setups, the LSP (`ts_ls`) will work just fine + ts_ls = {}, + -- + + lua_ls = { + -- cmd = { ... }, + -- filetypes = { ... }, + -- capabilities = {}, + settings = { + Lua = { + completion = { + callSnippet = 'Replace', + }, + -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings + -- diagnostics = { disable = { 'missing-fields' } }, + }, + }, + }, + } + + -- Ensure the servers and tools above are installed + -- + -- To check the current status of installed tools and/or manually install + -- other tools, you can run + -- :Mason + -- + -- You can press `g?` for help in this menu. + -- + -- `mason` had to be setup earlier: to configure its options see the + -- `dependencies` table for `nvim-lspconfig` above. + -- + -- You can add other tools here that you want Mason to install + -- for you, so that they are available from within Neovim. + local ensure_installed = vim.tbl_keys(servers or {}) + vim.list_extend(ensure_installed, { + 'stylua', -- Used to format Lua code + }) + require('mason-tool-installer').setup { ensure_installed = ensure_installed } + + require('mason-lspconfig').setup { + ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer) + automatic_installation = false, + handlers = { + function(server_name) + local server = servers[server_name] or {} + -- This handles overriding only values explicitly passed + -- by the server configuration above. Useful when disabling + -- certain features of an LSP (for example, turning off formatting for ts_ls) + server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) + require('lspconfig')[server_name].setup(server) + end, + }, + } + end, + }, + + { -- Autoformat + 'stevearc/conform.nvim', + event = { 'BufWritePre' }, + cmd = { 'ConformInfo' }, + keys = { + { + 'f', + function() + require('conform').format { async = true, lsp_format = 'fallback' } + end, + mode = '', + desc = '[F]ormat buffer', + }, + }, + opts = { + notify_on_error = false, + format_on_save = function(bufnr) + -- Disable "format_on_save lsp_fallback" for languages that don't + -- have a well standardized coding style. You can add additional + -- languages here or re-enable it for the disabled ones. + local disable_filetypes = { c = true, cpp = true } + if disable_filetypes[vim.bo[bufnr].filetype] then + return nil + else + return { + timeout_ms = 500, + lsp_format = 'fallback', + } + end + end, + formatters_by_ft = { + lua = { 'stylua' }, + -- Conform can also run multiple formatters sequentially + -- python = { "isort", "black" }, + -- + -- You can use 'stop_after_first' to run the first available formatter from the list + -- javascript = { "prettierd", "prettier", stop_after_first = true }, + }, + }, + }, + + { -- Autocompletion + 'saghen/blink.cmp', + event = 'VimEnter', + version = '1.*', + dependencies = { + -- Snippet Engine + { + 'L3MON4D3/LuaSnip', + version = '2.*', + build = (function() + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. + if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then + return + end + return 'make install_jsregexp' + end)(), + dependencies = { + -- `friendly-snippets` contains a variety of premade snippets. + -- See the README about individual language/framework/plugin snippets: + -- https://github.com/rafamadriz/friendly-snippets + -- { + -- 'rafamadriz/friendly-snippets', + -- config = function() + -- require('luasnip.loaders.from_vscode').lazy_load() + -- end, + -- }, + }, + opts = {}, + }, + 'folke/lazydev.nvim', + }, + --- @module 'blink.cmp' + --- @type blink.cmp.Config + opts = { + keymap = { + -- 'default' (recommended) for mappings similar to built-in completions + -- to accept ([y]es) the completion. + -- This will auto-import if your LSP supports it. + -- This will expand snippets if the LSP sent a snippet. + -- 'super-tab' for tab to accept + -- 'enter' for enter to accept + -- 'none' for no mappings + -- + -- For an understanding of why the 'default' preset is recommended, + -- you will need to read `:help ins-completion` + -- + -- No, but seriously. Please read `:help ins-completion`, it is really good! + -- + -- All presets have the following mappings: + -- /: move to right/left of your snippet expansion + -- : Open menu or open docs if already open + -- / or /: Select next/previous item + -- : Hide menu + -- : Toggle signature help + -- + -- See :h blink-cmp-config-keymap for defining your own keymap + preset = 'default', + + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps + }, + + appearance = { + -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font' + -- Adjusts spacing to ensure icons are aligned + nerd_font_variant = 'mono', + }, + + completion = { + -- By default, you may press `` to show the documentation. + -- Optionally, set `auto_show = true` to show the documentation after a delay. + documentation = { auto_show = false, auto_show_delay_ms = 500 }, + }, + + sources = { + default = { 'lsp', 'path', 'snippets', 'lazydev' }, + providers = { + lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 }, + }, + }, + + snippets = { preset = 'luasnip' }, + + -- Blink.cmp includes an optional, recommended rust fuzzy matcher, + -- which automatically downloads a prebuilt binary when enabled. + -- + -- By default, we use the Lua implementation instead, but you may enable + -- the rust implementation via `'prefer_rust_with_warning'` + -- + -- See :h blink-cmp-config-fuzzy for more information + fuzzy = { implementation = 'lua' }, + + -- Shows a signature help window while you type arguments for a function + signature = { enabled = true }, + }, + }, + + { -- You can easily change to a different colorscheme. + -- Change the name of the colorscheme plugin below, and then + -- change the command in the config to whatever the name of that colorscheme is. + -- + -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. + 'folke/tokyonight.nvim', + priority = 1000, -- Make sure to load this before all the other start plugins. + config = function() + ---@diagnostic disable-next-line: missing-fields + require('tokyonight').setup { + styles = { + comments = { italic = false }, -- Disable italics in comments + }, + } + + -- Load the colorscheme here. + -- Like many other themes, this one has different styles, and you could load + -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. + vim.cmd.colorscheme 'tokyonight-day' + end, + }, + + -- Highlight todo, notes, etc in comments + { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, + + { -- Collection of various small independent plugins/modules + 'echasnovski/mini.nvim', + config = function() + -- Better Around/Inside textobjects + -- + -- Examples: + -- - va) - [V]isually select [A]round [)]paren + -- - yinq - [Y]ank [I]nside [N]ext [Q]uote + -- - ci' - [C]hange [I]nside [']quote + require('mini.ai').setup { n_lines = 500 } + + -- Add/delete/replace surroundings (brackets, quotes, etc.) + -- + -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren + -- - sd' - [S]urround [D]elete [']quotes + -- - sr)' - [S]urround [R]eplace [)] ['] + require('mini.surround').setup() + + -- Simple and easy statusline. + -- You could remove this setup call if you don't like it, + -- and try some other statusline plugin + local statusline = require 'mini.statusline' + -- set use_icons to true if you have a Nerd Font + statusline.setup { use_icons = vim.g.have_nerd_font } + + -- You can configure sections in the statusline by overriding their + -- default behavior. For example, here we set the section for + -- cursor location to LINE:COLUMN + ---@diagnostic disable-next-line: duplicate-set-field + statusline.section_location = function() + return '%2l:%-2v' + end + + -- ... and there is more! + -- Check out: https://github.com/echasnovski/mini.nvim + end, + }, + { -- Highlight, edit, and navigate code + 'nvim-treesitter/nvim-treesitter', + build = ':TSUpdate', + main = 'nvim-treesitter.configs', -- Sets main module to use for opts + -- [[ Configure Treesitter ]] See `:help nvim-treesitter` + opts = { + ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' }, + -- Autoinstall languages that are not installed + auto_install = true, + highlight = { + enable = true, + -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. + -- If you are experiencing weird indenting issues, add the language to + -- the list of additional_vim_regex_highlighting and disabled languages for indent. + additional_vim_regex_highlighting = { 'ruby' }, + }, + indent = { enable = true, disable = { 'ruby' } }, + }, + -- There are additional nvim-treesitter modules that you can use to interact + -- with nvim-treesitter. You should go explore a few and see what interests you: + -- + -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` + -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context + -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects + }, + + -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the + -- init.lua. If you want these files, they are in the repository, so you can just download them and + -- place them in the correct locations. + + -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart + -- + -- Here are some example plugins that I've included in the Kickstart repository. + -- Uncomment any of the lines below to enable them (you will need to restart nvim). + -- + -- require 'kickstart.plugins.debug', + -- require 'kickstart.plugins.indent_line', + -- require 'kickstart.plugins.lint', + -- require 'kickstart.plugins.autopairs', + -- require 'kickstart.plugins.neo-tree', + -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps + + -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` + -- This is the easiest way to modularize your config. + -- + -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going. + -- { import = 'custom.plugins' }, + -- + -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec` + -- Or use telescope! + -- In normal mode type `sh` then write `lazy.nvim-plugin` + -- you can continue same window with `sr` which resumes last telescope search +}, { + ui = { + -- If you are using a Nerd Font: set icons to an empty table which will use the + -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table + icons = vim.g.have_nerd_font and {} or { + cmd = '⌘', + config = '🛠', + event = '📅', + ft = '📂', + init = '⚙', + keys = '🗝', + plugin = '🔌', + runtime = '💻', + require = '🌙', + source = '📄', + start = '🚀', + task = '📌', + lazy = '💤 ', + }, + }, +}) + +-- The line beneath this is called `modeline`. See `:help modeline` +-- vim: ts=2 sts=2 sw=2 et diff --git a/set_wallpaper.sh b/set_wallpaper.sh new file mode 100755 index 0000000..8fffb37 --- /dev/null +++ b/set_wallpaper.sh @@ -0,0 +1,8 @@ +#!/usr/bin/env bash +sleep 0.5 + +WALLPAPER_DIR="$HOME/Pictures/Wallpaper/" +CURRENT_WALLPAPERS=$(hyprctl hyprpaper listloaded) + +WALLPAPER=$(find "$WALLPAPER_DIR" -type f ! -name "$(basename "$CURRENT_WALLPAPER")" | grep -v .git | shuf -n 1) +hyprctl hyprpaper reload ,"$WALLPAPER"